The HDCA-702 MPEG TS Adaptor is a unique new product which enhance a workflow flexibility with various interfaces in an ultra-compact design. It provides real-time encoding of HD-SDI input signals into an MPEG TS for output via a DVB-ASI connector.
One of this adaptor's applications is field news gathering, using microwave and satellite transmission. The HDCA-702 encodes camcorder output signals to MPEG TS and outputs this stream via its DVB-ASI connector at the same time the camcorder is recording.
The adaptor also supports output of HDV compatible MPEG streams from i.LINK connector to use with HDV-compatible HDD units and nonlinear editing systems.
MPEG Transport Stream camera adapter for Sony camcorders with V-shoe mount
The HDCA-702 can be docked to Sony's camcorders without cables through the use of the camcorder's 50-pin interface. Other Sony camcorders without 50-pin interface can be connected via the HD-SDI.
HD-SDI input can be used to connect other non-Sony devices to the HDCA-702
Input will automatically switched if a 1080i or 720p signal is received
The transport stream bitrate can be independently set to enable the deck to output a lower data rate transport stream over DVB-ASI while recording the highest quality video on disc or SxS card
Outputs a 4:2:0 MP@HL MPEG-2 stream at video data rates starting from 15 - 43.25 Mbps
In 1080i mode, a 1440x1080 resolution stream will be output when the video bitrate is set to less than 35 Mbps. At video bitrates 35 Mbps or above, a 1920x1080 resolution may be selected
Program/Service number, Video, Audio, and PMT PIDs can be configured for use in multiprogram transport stream applications
MPEG transport stream can be output via the HDCA-702 DVB-ASI (BNC) interface or as a 25 Mbps CBR HDV stream over the 6-pin i.LINK interface
MPEG TS in MPEG-2 4:2:0 MP@HL or MPEG2 MP@H-14
1080/59.94i, 1080/29.97P, 720/59.94P
1440 x 1080 (1080 mode)
1920 x 1080 (1080 mode more than 35Mbps)
1280 x 720 (720 mode)