Home > XDCAM
Maximum Quality at Minimal Storage Costs With XAVC Recording
Exquisite recording typically requires extreme bitrates, quickly filling up your cards, overwhelming your storage and bogging down your network. The answer is Sony's clever XAVC encoding.
UWP-D Series Wireless Mics. Digital sound. Affordable Price.
Now you can get the digital sound quality you want at an affordable price. With more than 50 years of microphone innovation, our UWP-D wireless microphones are the ideal audio-for-video solution that will boost the performance of even entry-level camcorders.
View our Pro Playlists
Latest Press Releases
Interact with Sony
High Picture Quality
The PMW-400 incorporates three 2/3-inch-type Full-HD Exmor CMOS sensors (1920 x 1080) to achieve high resolution, high sensitivity (F12 at 60 Hz / F13 at 50 Hz), low noise (60 dB), and a wide dynamic range to give more freedom of expression for creative shooting.
Selectable Format and Bit Rates
The PMW-400 provides a wide variety of codec operation points. Users can record Full-HD video (1920 x 1080) at up to 50 Mbps
using MPEG HD422 as well as MPEG HD at 35 Mbps/ 25 Mbps, MPEG IMX at 50 Mbps, and DVCAM at 25 Mbps in MXF file, as standard supported formats. This camcorder also incorporates XAVC in the HD domain at a 100-Mbps data rate, enabling the creation of rich content with 10-bit quality. XAVC Intra is available now. XAVC Long is planned to be available in Fall 2014.
Click here to download Firmware upgrade V1.30.
3.5-inch* QHD Color LCD Viewfinder
With a large, easy-to-read 3.5-inch QHD color LCD viewfinder as a standard accessory, the PMW-400 offers outstanding resolution of 960 × 540 pixels, strongly supporting critical focus control during HD shooting. The viewfinder cover can be flipped up to enhance visibility when the camera is set on a tripod.
*Viewable area measured diagonally.
Variety of Interfaces
The PMW-400 Series offers two lines of SDI output enabling, for example, the director and camera operator to concurrently check shot content via two separate monitors. Also, for monitoring purposes these camcorders can be connected via HDMI to professional displays as well as domestic-use TVs. The i.LINK connector can be used for HDV when SP 1440 (FAT) mode is selected, and for DV when DVCAM (FAT) mode is selected, for both input and output signal flows.
Studio Camera Solutions
An optional CBK-CE01, a 50-pin interface lets the PMW-400 connect to the optical fiber and digital triax camera adaptors for greater creative possibilities through multi-camera operation. By connecting to the CA-FB70 optical fiber or CA-TX70 digital triax camera adaptors, the PMW-400 can be used as a studio camera in live productions and transmit signals over long distances while maintaining the high picture quality. Manufacturer pre-installation of the CBK-CE01 option is available.
Efficient Field Operation with the Wireless Adapter
The PMW-400 is designed to support wireless operation using an optional wireless adapter, the CBK-WA101/IFU. The CBK-WA101/IFU was exclusively made for the PMW-400 camera to easily attach and detach via the single finger mechanism with built in BNC and DC connection. Using this adapter, the user can stream video to a mobile device, enabling crews to check shot contents on site. Once recording is completed, proxy files3 created on the wireless adapter can be immediately transmitted back to the station. The wireless adapter also enables remote control of basic camera functions via the mobile device.
Click here to learn more about the PMW-400 Series XDCAM HD422 Camcorders.
Click here to view the PMW-400 Series brochure.
Click here to view the wireless adapter brochure.
Click here to locate an Authorized Sony Reseller.
1 4K not supported; requires firmware upgrade, planned in 2014.
2 i.LINK is a trademark of Sony used ony to designate that a product contains an IEEE1394 connector. Not all products with an i.LINK connector will necessarily communicate with each other. For information on compatibility, operating conditions, and proper connection, please refer to the documentation supplied with any device with an i.LINK connector.
3 Firmware upgrade is required when used with the CBK-WA101/IFU.
Sony Professional Services & Programs
Lower costs, increase control and maximize uptime with Sony, a leader in Professional Services.
Since 1970, Sony Training Institute, the industry education leader, has trained thousands of video professionals like you on the latest service technologies and production techniques. In addition to offering production and post production courses taught with entirely digital or a mixture of digital and analog equipment, Sony Training Institute provides workshops designed specifically to put you on the right track in your transition to digital.
1730 N. First Street
Mail Stop 1SE
San Jose, CA 95112
123 West Tryon Ave
Teaneck, NJ 07666
Need to Contact Us?
Cameras - Production products are serviced in both our Eastern and Western Services Facilities.
Eastern Service Facility
Sony Electronics Customer Service
123 W. Tryon Ave.
Teaneck, NJ 07666
Western Service Facility
Sony Electronics Customer Service
2706 Media Center Dr., Suite 130
Los Angeles, CA 90065