Already own this product? Product Registration
Back
LMD1950MD/HD

19" HD Medical Grade LCD Monitor featuring installed BKM-243HS Board

Pricing available upon request
Locate a Reseller

This LMD-1950MD/HD includes a BKM-243HS high definition serial digital interface card. The card is pre-installed in the option slot of the monitor. This interface includes a two channel input and one channel output. The card can accept an SDI signal as well and can automatically detect HDSDI or SDI signals.

Highlights:

  • 19" SXGA Monitor 1280x1024
  • Displays 700+ TV Lines of horizontal resolution
  • 24Volt DC Power Supply*
Features Benefits:
Sophisticated I/P (Interlace to Progressive) Conversion. Sony uses X-Algorithm technology method that combines the pixels above, below and in the diagonal direction of the image in areas where there is movement and inserts a natural pixel to create absent lines. The result is much smoother image reproduction that removes jagged edges from both moving and static picture areas.
10 bit signal processing-By adopting a newly designed full 10-bit digital video signal processor, this unit provides accurate lifelike images with smooth and natural gradation. Conventional 8-bit LCD monitors inherently exhibit color shift; however the LMD-1950MD with its 10-bit processing minimizes this and displays accurate color reproduction with consistent color temperature throughout the grayscale.
Outstanding Horizontal Resolution- The LMD-1950MD achieves a high horizontal resolution exceeding 700 TV lines, providing extremely precise and detailed images, which is essential during endoscopic procedures.
Sealed Chassis- The LMD-1950MD was designed without air vents to prevent any matter from entering or exiting the unit, this helps prevent possible damage to the unit. The unit is encased with a steel back panel providing additional protection during movement on surgical arms.
High Clarity & Contrast SXGA-Panel The LMD-1950MD incorporates an extremely bright LCD panel with a 5:4 aspect ratio and a robust multi-layer AR-coated protection layer. This coating minimizes the damage caused by accidental scratching of the panel and reduces the reflection from ambient light to a minimum. As a result, when used in bright lighting conditions, high contrast is maintained even in dark areas of the picture .This panel features a high contrast ratio of 600:1.
Native Scan Mode: The LMD-1950MD enables a Native Scan mode when displaying images generated by HD Signals (1080i/720P). This mode performs pixel to pixel mapping without scaling when processing high-definition signals to provide a native HD image on the monitor. The center area of the image id displayed, which is most critical during endoscopic procedures.
Versatile Inputs The LMD-1950MD can accept a variety of signals ranging from SD to HD video, analog VGA to SXGA, 3 PC input, as well as DVI-D input. In addition to its standard inputs, 4 types of optional input adapters are offered for use in its two rear slots. This allows multiple signal sources from a variety of equipment to be connected and monitored simply by selecting them via the input button on the front panel.
Memory for 20 users The User Memory functionality provides the capability of saving 20 patterns of memory settings. This allows users easily to set, save, and recall their preferred picture settings using an assigned user name. In addition, factory default settings can instantly be recalled by the touch of two buttons. The following parameters can be saved: Color temperature, Brightness, Contrast, Chroma, Phase, Aperture, Gamma, Aspect, Scan, Picture Delay Minimum, User Memory Name, User Color Temperature. Instant access to most of these controls is available from the buttons on the front bezel, as well as the OSD menu, which is provided in 7 languages
VESA Mounting Complying with the VESA standards of 100 mm hole spacing, the LMD-1950 MD can easily be mounted on a surgical equipment arm, rack, cart or wall.

General Specifications Detail:
Dimensions (W x H x D) 17 1/2 x 15 7/8 X 4 3/4 inches
Operating Humidity 30 to 85 % (no condensation)
Operating Temperature 0 to 40°C (32 to 104° F)
Power Consumption 66 W
Power Requirements AC 100 to 240 V ±10%
50/60 Hz
Safety Compliance UL60601-1
CSA 22.2 No.60601.1
EN 60601-1
FCC-A
IC-A
CE (MDD)-B
C-Tick
VCCI-A
JEIDA
Storage Humidity 0 to 90 % (no condensation)
Storage Temperature -10 to 40°C (14 to 104° F)
Weight 20.5 lbs
Panel Type : a-Si TFT Active Matrix
Screen Size: 19"
Resolution: SXGA 1280 x1024
700 TV Lines of Horizontal Resolution (Component)
Viewing Angle 89°/89°/89°/89°(typical)
Input : Composite:BNC (X1) 1Vp-p±3dB sync negative
Y/C input connector(4-pin Mini DIN) Y: 1.0Vp +- 3dB sync negative C: 0.286Vp-p +-3dB (NTSC burst signal level) 0.3Vp-p +-3dB (PAL burst signal level)
RGB/Component Input connectors BNC type(3) RGB input:0.7Vp-p +-3dB (Sync On Green 0.3Vp-p sync negative) Component input:0.7Vp-p +-3dB (75% chrominance standard color bar signal)
Ext . S ync External synchronized input connector :BNC type(1) 0.3 to 4 Vp-p +-bipolarity ternary or negative polarity binary
C o m pu t e r HD D-sub 15-pin x1 c o n n e c t o r R/G/B: 0.7 Vp-p, 75 ohms, sync positive (when G channel is sync negative, the internal sync can be used. 0.3Vp-p) Sync: TTL level, 2.2 kilohms, polarity free (H/V separate and composite sync) Plug & Play function: corresponds to DDC2B DVI-D ‚˜‚P TMDS (Single link)
Re m o t e i n pu t : Parallel remote te rm i n al 8 Pin Modular connector Assignable RS232-C (serial remote) D-sub 9pin (1) *Full Remote Control *User Memory Save/Load via RS-232C
Ou tpu t Vi de o o u tpu t BNC type(4) Loop-through, with 75 ohms automatic c o n n e c to rs terminal function 4-pin mini DIN (1) Loop-through , with 75 ohms automatic terminal function
E xte rn al BNC type(1) Loop-through, with 75 ohms automatic syn c h ro n i ze d terminal function o u tpu t c o n n e c to r
Powe r DC IN:24V, 2.8A (Supplied from AC adaptor "AC- 1950MD") AC IN:AC100`240V, 50/60Hz, 0.9A 0.4A DC OUT:24V, 2.8A
Powe r c o n su mpti o n Maximum: approx. 66W (When two BKM-229X are connected) Maximum: approx. 59W (When no BKM Input Adaptor are connected)
Dimensions (WxH D) 17 1/2" x 15 7/8" X 4 3/4"
Weight: 20.5 LBS without interface cards

Input/Output - Computer Specifications Detail:
Analog RGB 0.7 Vp-p
75 Ώ
Sync Positive
Remote Parallel Parallel Modular 8 pin (Assignable)
Serial Port Serial RS-232C
D-sub 9-pin

Input/Output - Input Specifications Detail:
Component 0.7Vp-p +-3dB
Component/RGB BNC x (3)
Composite BNC (X1)
1Vp-p ±3dB
Sync Negative
Y/C 4pin Mini DIN (x 1)
Y: 1.0 Vp-p ±3dB
sync negative
C: 0.286 Vp-p ±3dB (NTSC)
0.3 Vp-p ±3dB (PAL)
RGB 0.7Vp-p +-3dB

LCD Panel Type Specifications Detail:
Angle of View 89°/89°/89°/89°
Resolution 1280 x 1024 SXGA
Screen Size 19 inches
Video Resolution 700 TV lines

Supplied Accessories

Model: Description: U.S. List Price:
BKM243HS HDSDI/4:2:2 SDI Input Adaptor $1,299.00 Get details
BKM243HS

Optional Accessories

Model: Description: U.S. List Price:
BKM220D 4:2:2 SDI Input Adaptor $525.00 Get details
BKM227W Composite, Y/C Video Inputs for select monitors $750.00 Get details
BKM229X RGB/Component Video Input Module for Select Monitors $750.00 Get details
SU560 Stand for LMD-1950MD/2140MD/2450MD $445.00 Get details